Home  |  About Us  |  Search  |  Contact Us  |  FAQs  | Products  |  Warranties  |  Customer Service
  TOOL KITS  -  AND HARD TO FIND BRAKE TOOLS
Fluid for the assembly of master cylinders and brake calipers
Back to Top
Item Description
Price
  NOTE; Never use grease or oils on brake seals or master cylinder cups, as it will cause the seals & cups to swell
Price For one 4-oz Bottle $6.95
  This is the same Assembly Fluid that is used by all new car & truck Manufactures
This fluid has many uses like lubing anything rubber or plastic, pulling wire thru conduit pipe or for marine pump impallers,valve seals,water faucet seals,fuel injector pump seals and anything you are having trouble assembling
OEM FORD STUDS
Back to Top
  AXLE STUDS FOR 1987-2004 MUSTANG OR FACTORY FIVE CARS
10 studs
Price$19.95
  New Studs from Ford
installation tool
Back to Top
  Lisle Wheel Stub Installer Easily installs new wheel studs!! Use with ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug against the tool to pull the stud in place. Works on most all automotive and light truck wheel studs, foreign and domestic.
Price$29.95
  Tool only
OEM FORD STUDS and installation tool
Back to Top
  Lisle Wheel Stub Installer Easily installs new wheel studs!! Use with ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug against the tool to pull the stud in place. Works on most all automotive and light truck wheel studs, foreign and domestic.
kit includes 10 stud and installation tool
Price$49.95
  New Studs from Ford
Gas Pump Helper
Back to Top
  Check your oil while getting your tank filled
$5.25
 
$5.25
  Quick and easy keep it on your key chain
$5.25
THREAD SETTER KIT
Back to Top
Item Description
Price
Order
  THREAD SETTERS
$59.95
  JUST DRILL A HOLE AND PUT IN A THREAD SETTER QUICK AND SIMPLE WAY TO PUT THREADS IN METAL OR PLASTIC
  pro thread setter kit includes assortment of SAE poly nuts nosepieces and mandrels
$89.95
list price $129.95 special price $89.95
5MM Inserts for thread setter
Back to Top
Item Description
Price
Order
 5MM inserts 5MM quantity 50
$24.95
  quantity 50
$24.95
8/32 Inserts for thread setter
Back to Top
Item Description
Price
Order
 8/32 inserts 8/32 quantity 25
$24.95
  quantity 25
$24.95
10/32 Inserts for thread setter
Back to Top
Item Description
Price
Order
 10/32 inserts 10/32 quantity 25
$24.95
  quantity 25
$24.95
Button head cap screw
Back to Top
Item Description
Price
Order
 S/S Button head cap screw 8/32/ (1/2 inch long) quantity 50 Stainless Steel Screws
$24.95
  Button head screw to be used for thread setter
$24.95
Button head cap screw
Back to Top
Item Description
Price
Order
 S/S Button head cap screw 10/32/ (1/2 inch long) quantity 50 Stainless Steel Screws
$24.95
  Button head screw to be used for thread setter
$26.95
Button head cap screw
Back to Top
Item Description
Price
Order
 S/S Button head cap screw 1/4-20 (1/2 long) quantity 25 Stainless Steel Screws
$24.95
  Button head screw to be used for thread setter
$24.95
ADJUSTABLE PROPORTIONING VALVE
Back to Top
Item Description
Price
Order
  ADJUSTABLE PROPORTIONING VALVE MOUNTING HOLE DIAMETER .250 HOLE SPACING 1.00 INCH ADJUSTABLE PROPORTIONING VALVE
$59.95
  MAX PRESSURE REDUCTION 57% INLET/OUTLET PORTS 1/8-27 NPT
$59.95
RESIDUAL PRESSURE VALVE
Back to Top
Item Description
Price
Order
  A residual pressure valve is used when a master cylinder is mounted equal to or below the horizontal plane of the calipers or drum brake wheel cylinders. Install the valve as close as possible to the master cylinder and position the end marked M.C. toward the master cylinder and the end marked out toward the brakes For disc or drum brakes with dual master cylinder
  1/8-27 NPT INLET AND OUT LET 2-Lb Valve
$19.95
DRILL KIT
Back to Top
Item Description
Price
  NOTE; most ff cobra builders use the wrong drill bits when doing the sheet metal work these bits are made for sheet metal work
Professional drill bits
5 bits Price$9.95
  Sheel metal twist drill bits 1/8 inch x 2 inch short extremely sturdy drills are effective for sideways stress rather than point wear
DRILL KIT
BRAKE LINE CLIPS FOR S/S HOSE AND RUBBER HOSE
Back to Top
Item Description
Price
 
Price$29.95
  FOR THE PROFESSIONAL BUILDER (BUY IN BULK)
100 CLIPS
BRAKE BLEEDER REPAIR KIT
Back to Top
Item Description
Price
  NOTE;Remember always clean up Brake fluid with soap and water only
Price$9.95
  THIS KIT IS 1/4 INCH PIPE. SIZE HOLE TO DRILL 29/64 .453 THEN TAP WITH 1/4 INCH PIPE TAP
BLEEDER SCREW REPAIR KIT
BRAKE BLEEDER REPAIR KIT
Back to Top
Item Description
Price
  NOTE;Remember always clean up Brake fluid with soap and water only
Price$9.95
  THIS KIT IS 1/8 INCH PIPE. SIZE HOLE TO DRILL 5/16 .312 THEN TAP WITH 1/8 INCH PIPE TAP
BLEEDER SCREW REPAIR KIT
THE VERY BEST BRAKE BLEEDER KIT
Back to Top
Item Description
Price
  NOTE;THIS KIT KEEPS BRAKE FLUID OFF THE FLOOR AND OFF THE CALIPERS IT SNAPS ON TO THE BLEEDER SCREW AND STAYS ON WHILE YOU BLEED THE BRAKES,THE TOOL IS MADE BY LISLE, First CLASS TOOLS
keep the job site clean
Price$9.95
  ALL CARS AND TRUCKS ALL Years (Lisle Professional Tools) (Brake bleeder kit) Remember always clean up Brake fluid with soap and water only
BLEEDER KIT
Vacuum Tester Tool
Back to Top
Item Description
Price
  NOTE; With this tool you can test many things
Price$99.95
  Lisle 75000 Vacuum Tool is for testing engine valve seals,detecting vacuum leaks,fuel system.pumps,chokes,throttle detonation,vacuum diaphrams,emission systems,auto trans,brake systems,brake bleeding,brake boosters,heating and A.C. controls,computer system sensors.
Lisle Pro Tool
KD Rethreading Tool
Back to Top
Item Description
Price
  NOTE; With this tool you can save the threads on most spindles
Price$99.95
  KD Master Rethreading Kit 3481 12 Piece Thread Restoring Die Set can be used to clean and repair axle threads on spindles of the following sizes-3/4-16 3/4-20 13/16-20 27/32-20 M16-1 M16-1.5 M20-1 M20-1.5 M22-1.5 M24-1.5 M24-2 M27-2
KD Pro Tool
Snap Ring Tool
Back to Top
Item Description
Price
  NOTE; With this tool you can hold a snap ring open
Price$14.95
  Lisle 18800 Retainer Remover Snap Ring Tool
Lisle Pro Tool
KD TUBING CUTTER 2107
Back to Top
Item Description
Price
  KD TUBING CUTTER 2107 FOR GETTING INTO TIGHT PLACES
Price$9.95
  KD TUBING CUTTER 2107
KD PRO TOOL
KD DOUBLE FLARING TOOL SET 2199
Back to Top
Item Description
Price
  KD DOUBLE FLARING TOOL SET MAKE YOUR OWN LINES WITH THIS DOUBLE FLARING SET
Price$49.95
  KD DOUBLE FLARING TOOL SET 2199
KD PRO TOOL
HEAVY DUTY RIVETER BY KD TOOLS
Back to Top
Item Description
Price
  NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
Pop Riveter
Price$34.95
  note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle
This is A HEAVY DUTY RIVETER Kit
HEAVY DUTY RIVETER BY KD TOOLS and S/S BRAKE LINE BRACKETS WITH ANTI ROTATION TABS AND STAINLESS STEEL POP RIVETS
Back to Top
Item Description
Price
  NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
Pop Riveter with stainless steel brake line brackets
Price$53.95
  note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle
This is A HEAVY DUTY RIVETER Kit
HEAVY DUTY RIVETER BY KD TOOLS and right angle edge PROTRACTOR with magnetic base S/S BRAKE LINE BRACKETS WITH ANTI ROTATION TABS AND STAINLESS STEEL POP RIVETS
Back to Top
Item Description
Price
  NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
Pop Riveter with stainless steel brake line brackets and right angle edge PROTRACTOR with magnetic base
Price$69.95
  note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle
Building a factory five car or custom building a street rod,then this kit is for you
ANGLE PROTRACTOR
Back to Top
Item Description
Price
  NOTE; TWO ADJUSTABLE ANGLE POINTERS
PROTRACTOR
Price$18.95
  angle pitch calculator
RIGHT ANGLE EDGE AND MAGNETIC BASE AND BACK
TUBING BENDER
  NOTE; THIS TOOL IS MADE BY K.D, First CLASS TOOLS
4 SIZES
Price$39.95
  TUBING BENDER FOR BRAKE LINES, SIZES 1/4 3/16 5/16 3/8
CUSTOM BEND YOUR LINES
PISTON SPREADER TOOL
  NOTE; THIS TOOL IS MADE BY OTC, First CLASS TOOLS
NEW PISTON SPREADER TOOL
Price$39.95
  ALL CARS AND TRUCKS ALL Years (piston spreader TOOL) (Front or Rear Wheels If Rear are nolever type)
Caliper Spreader
PISTON SPREADER TOOL
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
NEW PISTON SPREADER TOOL
Price$18.95
  ALL CARS AND TRUCKS ALL Years (piston spreader TOOL) (Front or Rear Wheels If Rear are nolever type)
caliper spreader
REAR BRAKE TOOL
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
ROTATES PISTON BACK INTO THE CALIPER WHEN REPLACING PADS
Price$16.95
  ALL CARS AND TRUCKS ALL Years (ROTATES PISTON TOOL)use with 3/8 inch ratchet and extension (Rear Wheels If Rears are Emergency brake lever type)
caliper Piston Rotater
REAR BRAKE TOOL (PROFESSIONAL TOOL KIT)
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
ROTATES PISTON BACK INTO THE CALIPER WHEN REPLACING PADS
Price$89.95
  ALL CARS AND TRUCKS ALL Years (Lisle Professional Tool Kit) (ROTATES PISTON TOOL)use with 3/8 inch ratchet and extension (Rear Wheels If Rears are Emergency brake lever type)
caliper Piston Rotater,Professional Tool
Wrench 8x10 mm
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY KD tools, First CLASS TOOLS
BRAKE Bleeder Wrench
Price$11.95
  ALL CARS AND TRUCKS ALL Years with 8 or 10mm bleeder screws (KD Professional Tools) Remember always clean up Brake fluid with soap and water only
8x10 mm wrench
Wrench 5/16x3/8 inch
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY KD tools, First CLASS TOOLS
5/16x3/8 inch wrench
Price$9.95
  ALL CARS AND TRUCKS ALL Years with 5/16x3/8 inch bleeder screws (KD Professional Tools) Remember always clean up Brake fluid with soap and water only
Brake Bleeder Wrench
SNAP RING PLIERS
Back to Top
Item Description
Price
  NOTE; THIS TOOL IS MADE BY Lisle tools, First CLASS TOOLS
5/16x3/8 inch wrench
Price$15.95
  SNAP RING PLIERS INTERNAL RINGS AND EXTERNAL RINGS (LISLE Professional Tools) Remember always clean up Brake fluid with soap and water only
SNAP RING PLIERS
MOTHERS
Keep your pipes looking like new



  TO KEEP CERAMIC CHROME LOOKING LIKE NEW USE MOTHERS MAG POLISH
5 OZ.
$7.95
   About Us  |  Terms Of Service  |  Privacy Policy

Site Created, Maintained, by discbrakesrus.com
888 558 5757 ©2000