TOOL KITS - AND HARD TO FIND BRAKE TOOLS
|
|
Fluid for the assembly of master cylinders and brake calipers
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; Never use grease or oils on brake seals or master cylinder cups, as it will cause the seals & cups to swell |
|
Price For one 4-oz Bottle $6.95
|
|
|
This is the same Assembly Fluid that is used by all new car & truck Manufactures |
This fluid has many uses like lubing anything rubber or plastic, pulling wire thru conduit pipe or for marine pump impallers,valve seals,water faucet seals,fuel injector pump seals and anything you are having trouble assembling |
|
|
|
|
Back to Top |
|
AXLE STUDS FOR 1987-2004 MUSTANG OR FACTORY FIVE CARS
|
10 studs |
Price$19.95
|
|
|
New Studs from Ford |
|
|
|
|
Back to Top |
|
Lisle Wheel Stub Installer
Easily installs new wheel studs!!
Use with ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug against the tool to pull the stud in place. Works on most all automotive and light truck wheel studs, foreign and domestic.
|
|
Price$29.95
|
|
|
|
Tool only |
|
|
OEM FORD STUDS and installation tool
|
Back to Top |
|
Lisle Wheel Stub Installer
Easily installs new wheel studs!!
Use with ratchet or impact wrench to pull the new stud securely in place. Position the tool over the stud shaft. Tighten the lug against the tool to pull the stud in place. Works on most all automotive and light truck wheel studs, foreign and domestic.
|
kit includes 10 stud and installation tool |
Price$49.95
|
|
|
|
New Studs from Ford |
|
|
|
|
Back to Top |
|
Check your oil while getting your tank filled
|
|
$5.25
|
|
|
|
$5.25
|
|
|
Quick and easy keep it on your key chain
|
$5.25
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
THREAD SETTERS
|
|
$59.95
|
|
|
JUST DRILL A HOLE AND PUT IN A THREAD SETTER |
QUICK AND SIMPLE WAY TO PUT THREADS IN METAL OR PLASTIC |
|
|
|
pro thread setter kit includes assortment of SAE poly nuts nosepieces and mandrels |
|
$89.95
|
|
5MM Inserts for thread setter
|
Back to Top |
| Item Description |
|
Price |
Order |
|
5MM inserts |
5MM quantity 50 |
$24.95
|
|
|
quantity 50 |
|
$24.95
|
|
8/32 Inserts for thread setter
|
Back to Top |
| Item Description |
|
Price |
Order |
|
8/32 inserts |
8/32 quantity 25 |
|
$24.95
|
|
|
quantity 25 |
|
$24.95
|
|
10/32 Inserts for thread setter
|
Back to Top |
| Item Description |
|
Price |
Order |
|
10/32 inserts |
10/32 quantity 25 |
|
$24.95
|
|
|
quantity 25 |
|
$24.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
S/S Button head cap screw |
8/32/ (1/2 inch long) quantity 50 |
Stainless Steel Screws
$24.95
|
|
|
Button head screw to be used for thread setter |
|
$24.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
S/S Button head cap screw |
10/32/ (1/2 inch long) quantity 50 |
Stainless Steel Screws
|
$24.95
|
|
|
Button head screw to be used for thread setter |
|
$26.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
S/S Button head cap screw |
1/4-20 (1/2 long) quantity 25 |
Stainless Steel Screws
|
$24.95
|
|
|
Button head screw to be used for thread setter |
|
$24.95
|
|
ADJUSTABLE PROPORTIONING VALVE
|
Back to Top |
| Item Description |
|
Price |
Order |
|
ADJUSTABLE PROPORTIONING VALVE |
MOUNTING HOLE DIAMETER .250 HOLE SPACING 1.00 INCH |
ADJUSTABLE PROPORTIONING VALVE
$59.95
|
|
|
MAX PRESSURE REDUCTION 57% INLET/OUTLET PORTS 1/8-27 NPT |
|
$59.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
A residual pressure valve is used when a master cylinder is mounted equal to or below the horizontal plane of the calipers or drum brake wheel cylinders. |
Install the valve as close as possible to the master cylinder and position the end marked M.C. toward the master cylinder and the end marked out toward the brakes |
For disc or drum brakes with dual master cylinder
|
|
|
1/8-27 NPT INLET AND OUT LET |
2-Lb Valve
|
$19.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; most ff cobra builders use the wrong drill bits when doing the sheet metal work these bits are made for sheet metal work
|
Professional drill bits |
5 bits Price$9.95
|
|
|
Sheel metal twist drill bits 1/8 inch x 2 inch short extremely sturdy drills are effective for sideways stress rather than point wear |
DRILL KIT |
|
|
BRAKE LINE CLIPS FOR S/S HOSE AND RUBBER HOSE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
Price$29.95
|
|
|
FOR THE PROFESSIONAL BUILDER (BUY IN BULK) |
100 CLIPS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
|
THIS KIT IS 1/4 INCH PIPE. SIZE HOLE TO DRILL 29/64 .453 THEN TAP WITH 1/4 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
|
THIS KIT IS 1/8 INCH PIPE. SIZE HOLE TO DRILL 5/16 .312 THEN TAP WITH 1/8 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
THE VERY BEST BRAKE BLEEDER KIT
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;THIS KIT KEEPS BRAKE FLUID OFF THE FLOOR AND OFF THE CALIPERS IT SNAPS ON TO THE BLEEDER SCREW AND STAYS ON WHILE YOU BLEED THE BRAKES,THE TOOL IS MADE BY LISLE, First CLASS TOOLS
|
keep the job site clean |
Price$9.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (Lisle Professional Tools) (Brake bleeder kit) Remember always clean up Brake fluid with soap and water only |
BLEEDER KIT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; With this tool you can test many things
|
|
Price$99.95
|
|
|
Lisle 75000 Vacuum Tool is for testing engine valve seals,detecting vacuum leaks,fuel system.pumps,chokes,throttle detonation,vacuum diaphrams,emission systems,auto trans,brake systems,brake bleeding,brake boosters,heating and A.C. controls,computer system sensors. |
Lisle Pro Tool |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; With this tool you can save the threads on most spindles
|
|
Price$99.95
|
|
|
|
KD Master Rethreading Kit 3481 12 Piece Thread Restoring Die Set can be used to clean and repair axle threads on spindles of the following sizes-3/4-16 3/4-20 13/16-20 27/32-20 M16-1 M16-1.5 M20-1 M20-1.5 M22-1.5 M24-1.5 M24-2 M27-2 |
KD Pro Tool |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; With this tool you can hold a snap ring open
|
|
Price$14.95
|
|
|
|
Lisle 18800 Retainer Remover Snap Ring Tool |
Lisle Pro Tool |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
KD TUBING CUTTER 2107 FOR GETTING INTO TIGHT PLACES |
|
Price$9.95
|
|
|
|
KD TUBING CUTTER 2107 |
KD PRO TOOL |
|
|
KD DOUBLE FLARING TOOL SET 2199
|
Back to Top |
| Item Description |
|
Price |
|
|
KD DOUBLE FLARING TOOL SET MAKE YOUR OWN LINES WITH THIS DOUBLE FLARING SET
|
|
Price$49.95
|
|
|
|
KD DOUBLE FLARING TOOL SET 2199 |
KD PRO TOOL |
|
|
HEAVY DUTY RIVETER BY KD TOOLS
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
|
Pop Riveter |
Price$34.95
|
|
|
|
note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle |
This is A HEAVY DUTY RIVETER Kit |
|
|
HEAVY DUTY RIVETER BY KD TOOLS and S/S BRAKE LINE BRACKETS WITH ANTI ROTATION TABS AND STAINLESS STEEL POP RIVETS
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
|
Pop Riveter with stainless steel brake line brackets |
Price$53.95
|
|
|
|
note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle |
This is A HEAVY DUTY RIVETER Kit |
|
|
HEAVY DUTY RIVETER BY KD TOOLS and right angle edge PROTRACTOR with magnetic base S/S BRAKE LINE BRACKETS WITH ANTI ROTATION TABS AND STAINLESS STEEL POP RIVETS
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL is made by KD tools for Craftsman and still has the full one year warranty by Craftsman
|
Pop Riveter with stainless steel brake line brackets and right angle edge PROTRACTOR with magnetic base |
Price$69.95
|
|
|
|
note: Riveter comes with nosepieces 3/32 1/8 5/32 3/16 included on handle |
Building a factory five car or custom building a street rod,then this kit is for you |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; TWO ADJUSTABLE ANGLE POINTERS
|
PROTRACTOR |
Price$18.95
|
|
|
|
angle pitch calculator |
RIGHT ANGLE EDGE AND MAGNETIC BASE AND BACK |
|
|
|
|
|
|
NOTE; THIS TOOL IS MADE BY K.D, First CLASS TOOLS
|
4 SIZES |
Price$39.95
|
|
|
TUBING BENDER FOR BRAKE LINES, SIZES 1/4 3/16 5/16 3/8 |
CUSTOM BEND YOUR LINES |
|
|
|
|
|
|
NOTE; THIS TOOL IS MADE BY OTC, First CLASS TOOLS
|
NEW PISTON SPREADER TOOL |
Price$39.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (piston spreader TOOL) (Front or Rear Wheels If Rear are nolever type) |
Caliper Spreader |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
|
NEW PISTON SPREADER TOOL |
Price$18.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (piston spreader TOOL) (Front or Rear Wheels If Rear are nolever type) |
caliper spreader |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
|
ROTATES PISTON BACK INTO THE CALIPER WHEN REPLACING PADS |
Price$16.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (ROTATES PISTON TOOL)use with 3/8 inch ratchet and extension (Rear Wheels If Rears are Emergency brake lever type) |
caliper Piston Rotater |
|
|
REAR BRAKE TOOL (PROFESSIONAL TOOL KIT)
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY LISLE, First CLASS TOOLS
|
ROTATES PISTON BACK INTO THE CALIPER WHEN REPLACING PADS |
Price$89.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (Lisle Professional Tool Kit) (ROTATES PISTON TOOL)use with 3/8 inch ratchet and extension (Rear Wheels If Rears are Emergency brake lever type) |
caliper Piston Rotater,Professional Tool |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY KD tools, First CLASS TOOLS
|
BRAKE Bleeder Wrench |
Price$11.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years with 8 or 10mm bleeder screws (KD Professional Tools) Remember always clean up Brake fluid with soap and water only |
8x10 mm wrench |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY KD tools, First CLASS TOOLS
|
5/16x3/8 inch wrench |
Price$9.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years with 5/16x3/8 inch bleeder screws (KD Professional Tools) Remember always clean up Brake fluid with soap and water only |
Brake Bleeder Wrench |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; THIS TOOL IS MADE BY Lisle tools, First CLASS TOOLS
|
5/16x3/8 inch wrench |
Price$15.95
|
|
|
|
SNAP RING PLIERS INTERNAL RINGS AND EXTERNAL RINGS (LISLE Professional Tools) Remember always clean up Brake fluid with soap and water only |
SNAP RING PLIERS |
|
|
|
|
|
Keep your pipes looking like new |
|
|
TO KEEP CERAMIC CHROME LOOKING LIKE NEW USE MOTHERS MAG POLISH |
5 OZ. |
$7.95
|
|
Site Created, Maintained, by discbrakesrus.com
888 558 5757 ©2000
|
