CALIPER KITS FRONT WHEEL ONLY 4LUG 60MM BORE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS FRONT WHEEL ONLY 4LUG 60MM BORE |
CALIPER AND ROTOR 4LUG |
Click Here For CALIPER KITS FRONT WHEEL ONLY 4LUG 60MM BORE
|
|
CALIPER KITS FRONT WHEEL ONLY 4LUG 73 MM BORE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS FRONT WHEEL ONLY 4LUG 73 MM BORE |
CALIPER AND ROTOR 4LUG |
|
Click Here For CALIPER KITS FRONT WHEEL ONLY 4LUG 73MM BORE
|
|
CALIPER KITS FRONT WHEEL ONLY 5LUG 60 MM BORE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS FRONT WHEEL ONLY 5LUG 60 MM BORE |
CALIPER AND ROTOR 5LUG |
Click Here For CALIPER KITS FRONT WHEEL ONLY 5LUG 60MM BORE
|
|
CALIPER KITS FRONT WHEEL ONLY 5LUG 73 MM BORE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS FRONT WHEEL ONLY 5LUG 73 MM BORE |
CALIPER AND ROTOR 5LUG |
|
Click Here For CALIPER KITS FRONT WHEEL ONLY 5LUG 73MM BORE
|
|
Gt-PBR CALIPERS KIT FRONT WHEELS WITH 11 INCH ROTORS (for 15 inch rims)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Gt-PBR CALIPERS KIT FRONT WHEELS WITH 11 INCH ROTORS |
Gt-PBR CALIPERS KIT WITH 11 INCH ROTORS |
Click Here For CALIPER KITS FRONT WHEEL ONLY GT TWO PISTON
|
|
COBRA KIT FRONT WHEELS WITH 13 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR COBRA KIT FRONT WHEELS WITH 13 INCH ROTORS |
COBRA KIT WITH 13 INCH ROTORS |
Click Here For CALIPER KITS FRONT WHEEL ONLY COBRA TWO PISTON
|
|
6 PISTON CALIPERS FRONT WHEELS WITH 13 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 13 INCH ROTORS 1994-2004 |
6 PISTON CALIPERS WITH 13 INCH ROTORS |
Click Here For CALIPER KITS FRONT WHEEL ONLY SIX PISTON CALIPERS
|
|
6 PISTON CALIPERS FRONT WHEELS WITH 14 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 14 INCH ROTORS 2005-2016 |
6 PISTON CALIPERS WITH 14 INCH ROTORS |
|
Click Here For CALIPER KITS FRONT WHEEL ONLY SIX PISTON CALIPERS
|
|
for 5 lug 1987-1993 spindles 6 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 13 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 13 INCH ROTORS |
6 PISTON CALIPERS WITH 13 INCH ROTORS |
Click Here For CALIPER KITS FRONT WHEEL ONLY 6 PISTON CALIPERS
|
|
for 5 lug 1987-1993 spindles 6 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 12 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 12 INCH ROTORS |
6 PISTON CALIPERS WITH 12 INCH ROTORS |
|
Click Here For CALIPER KITS FRONT WHEEL ONLY 6 PISTON CALIPERS
|
|
for 5 lug 1987-1993 spindles 4 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 10.5 INCH ROTORS FOR 15 INCH WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 10.5 INCH ROTORS |
4 PISTON CALIPERS WITH 10.5 INCH ROTORS |
|
Click Here For CALIPER KITS FRONT WHEEL ONLY 4 PISTON CALIPERS
|
|
for 1994-2004 spindles 4 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 11 3/4 INCH ROTORS FOR 15 INCH WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 11 3/4 INCH ROTORS |
4 PISTON CALIPERS WITH 11 3/4 INCH ROTORS |
Click Here For CALIPER KITS FRONT WHEEL ONLY 4 PISTON CALIPERS
|
|
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 15 INCH WHEELS
|
Back to Top |
|
|
|
|
|
CLICK TO FAR RIGHT REAR STRAIGHT REAR END 12 INCH ROTORS FOR 15 INCH WHEELS |
4 PISTON CALIPERS WITH 12 INCH ROTORS |
|
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
|
|
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 13 INCH ROTORS FOR 17 INCH WHEELS
|
Back to Top |
|
|
|
|
|
CLICK TO FAR RIGHT REAR STRAIGHT REAR END 13 INCH ROTORS FOR 17 INCH WHEELS |
4 PISTON CALIPERS WITH 13 INCH ROTORS |
|
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
|
|
COMPLETE KITS FRONT AND REARS WITH ONE PISTON CALIPERS (FOR 15 INCH WHEELS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 60MM BIG KIT WITH 11 INCH FRONT AND 10.11/64 INCH REARS (FOR 15 INCH WHEELS) |
COMPLETE KITS FRONT AND REARS (FOR 15 INCH WHEELS) |
Click Here For COMPLETE KITS FRONT AND REARS
|
|
COMPLETE KITS FRONT AND REARS WITH TWO PISTON CALIPERS (FOR 15 INCH WHEELS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR PBR TWO PISTON CALIPER KIT WITH 11 INCH FRONT AND 10.5 INCH REARS (FOR 15 INCH WHEELS) |
COMPLETE KITS FRONT AND REARS (FOR 15 INCH WHEELS) |
Click Here For COMPLETE KITS FRONT AND REARS
|
|
COMPLETE COBRA KITS FRONT AND REARS (FOR 17 INCH WHEELS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR COBRA KIT WITH 13 INCH FRONT AND 11.65 INCH REARS |
COMPLETE KITS FRONT AND REARS (FOR 17 INCH WHEELS) |
 
Click Here For COMPLETE KITS FRONT AND REARS
|
|
COMPLETE COBRA KITS FRONT AND GT REARS 10.5 INCH REAR ROTORS (FOR 17 INCH WHEELS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR COBRA KIT WITH 13 INCH FRONT AND 10.5 INCH REARS |
COMPLETE KITS FRONT AND REARS YOU DO NOT NEED TO TAKE THE AXLES OUT WITH THIS KIT (FOR 17 INCH WHEELS) |
|
Click Here For COMPLETE KITS FRONT AND REARS
|
|
CALIPERS ONLY REAR WHEEL T-BIRD
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPERS ONLY REAR WHEEL T-BIRD |
CALIPERS ONLY REAR WHEEL T-BIRD |
Click Here For CALIPERS ONLY REAR WHEEL T-BIRD
|
|
CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS |
CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS |
Click Here For CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
|
|
CALIPER KITS REAR WHEEL WITH BIG 13 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS REAR WHEEL WITH 13 INCH ROTORS |
CALIPER KITS REAR WHEEL WITH BIG 13 INCH ROTORS |
Click Here For CALIPER KITS REAR WHEEL WITH 13 INCH ROTORS
|
|
COBRA & GT CALIPER KITS REAR WHEEL WITH 10.5 or 11.65 INCH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS |
COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS |
|
Click Here For COBRA CALIPER KITS REAR WHEEL WITH 10.5 or 11.65 INCH ROTORS
|
|
DRUM TO DISC WITH 10.11/64 ROTORS 4LUG OR 5LUG AND T-BIRD CALIPERS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR DRUM TO DISC WITH 10.11/64 ROTORS 4LUG OR 5LUG AND T-BIRD CALIPERS |
|
|
Click Here For DRUM TO DISC WITH 10.11/64 ROTORS 4LUG OR 5LUG AND T-BIRD CALIPERS
|
|
GT-REAR KIT 10.5 ROTORS FOR SPEC RACER
|
Back to Top |
|
|
|
|
|
IF YOU ARE BUILDING A SPEC RACER THEN YOU NEED THE GT BRAKES WITH 10.5 INCH ROTORS
| |
Clack here for GT-REAR KIT 10.5 ROTORS FOR SPEC RACER
|
|
IRS 13 INCH REAR ROTOR KIT
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BIG IRS 13 inch REAR KIT |
IRS 13 inch REAR KIT |
Click Here For IRS big 13 inch REAR KIT
|
|
IRS COBRA REAR KIT with 11.65 inch Rotors
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS COBRA REAR KIT |
IRS COBRA REAR KIT |
|
Click Here For IRS COBRA REAR KIT
|
|
IRS T-BIRD REAR KIT with 10.5 inch rotors
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS T-BIRD REAR KIT |
IRS T-BIRD REAR KIT |
|
Click Here For IRS T-BIRD REAR KIT
|
|
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 15 INCH WHEELS
|
Back to Top |
|
|
|
|
|
CLICK TO FAR RIGHT REAR STRAIGHT REAR END 12 INCH ROTORS FOR 15 INCH WHEELS |
4 PISTON CALIPERS WITH 12 INCH ROTORS |
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
|
|
NEW FOR FACTORY FIVE CUSTOMERS SOUND DAMPING SHEETS AND MORE
|
Back to Top |
|
|
|
|
|
CLICK TO FAR RIGHT FOR SOUND DAMPING SHEETS |
New Item |
Click Here For Sounding Damping sheets
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Aluminum Drive shaft |
Aluminum Drive shaft |
Click Here For Aluminum Drive shaft
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR oil Gage s/s Lines |
oil,vacuum,fuel Gage s/s Lines |
Click Here For oil Gage s/s Lines
|
|
Ceramic exhaust Side pipes
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Ceramic exhaust Side pipes |
Ceramic exhaust |
Click Here For Ceramic exhaust side pipes
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE CABLES |
E-BRAKE CABLES |
Click Here For E-BRAKE CABLES
|
|
E-BRAKE CABLE (adjustable ebrake Y cable and non adjustable brake Y cable)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE Y CABLE |
E-BRAKE Y CABLE |
Click Here For E-BRAKE Y CABLE
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR GAS PEDAL KIT |
FFR MK III Gas Pedal |
Click Here For GAS PEDAL
|
|
IRS BRACKETS AND 8.8 STRAIGHT REAR ENDS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER BRACKETS FOR IRS AND 8.8 STRAIGHT REAR ENDS |
IRS BRACKETS AND 4LUG AND 5LUG |
Click Here For IRS REAR BRACKETS AND 5LUG AND 4LUG
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR MASTER CYLINDERS |
MASTER CYLINDERS |
Click Here For MASTER CYLINDERS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CLUTCH KIT |
Clutch Quadrant |
Click Here For Clutch adjustment kit
|
|
ADJUSTABLE ROD FOR MASTER Cylinder
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR ADJUSTABLE ROD FOR MASTER Cylinder |
ADJUSTABLE ROD |
Click Here For ADJUSTABLE ROD FOR MASTER Cylinder
|
|
|
|
Back to Top |
|
|
|
|
|
OEM FORD MUSTANG BRAKE LIGHT SWITCH |
BRAKE LIGHT SWITCH |
Click Here For BRAKE LIGHT SWITCH
|
|
ADJUSTABLE PROPORTIONING VALVE
|
Back to Top |
|
|
|
|
|
NOTE; ADJUSTABLE PROPORTIONING VALVE |
ADJUSTABLE PROPORTIONING VALVE |
Click Here For PROPORTIONING VALVE
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SN-95 and up |
SN-95 and up FRONT SPINDLES |
Click Here For SN 95 and up SPINDLES
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 1987-1993 |
1987-1993 FRONT SPINDLES |
Click Here For 1987-1993 SPINDLES
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SPINDLE NUT KIT |
OEM FORD PARTS |
Click Here For SPINDLE NUT KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR WHEEL BEARINGS |
|
WHEEL BEARINGS
Click Here For WHEEL BEARINGS
|
|
REAR BEARING KIT with 8.8 live axle
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT |
WITH SEALS |
Click Here For REAR BEARING KIT
|
|
REAR BEARING KIT FOR 8.8 IRS CENTER SECTION
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT |
FOR 8.8 IRS CENTER SECTION |
|
Click Here For REAR BEARING KIT
|
|
REAR WHEEL BEARINGS FOR 8.8 IRS REAR END
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR WHEEL BEARINGS |
FOR 8.8 IRS REAR END |
Click Here For REAR WHEEL BEARINGS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SN-95 CAPS |
SN-95 FRONT (CAPS) |
Click Here For SN 95 (CAPS)
|
|
1987-1993 (CAPS) FOR SPINDLES
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CAPS |
1987-1993 FRONT (CAPS) |
|
Click Here For 1987-1993 (CAPS)
|
|
SN-95 and up SPINDLES (CAPS AND BEARINGS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SN-95 and up CAPS AND BEARINGS |
SN-95 and up FRONT (CAPS AND BEARINGS) |
Click Here For SN 95 and up (CAPS AND BEARINGS)
|
|
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS |
IRS REAR HUBS |
Click Here For IRS REAR HUBS
|
|
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE WITH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS AND ROTORS |
IRS REAR HUBS AND ROTORS |
Click Here For IRS REAR HUBS AND ROTORS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS REAR KNUCKLES |
IRS REAR KNUCKLES |
Click Here For IRS KNUCKLES
|
|
HARDWARE FOR 8.8 IRS REAR END
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR HARDWARE FOR 8.8 IRS REAR END |
IRS REAR END HARDWARE |
Click Here For IRS 8.8 REAR END HARDWARE
|
|
8.8 IRS COMPLETE REAR END
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS 8.8 REAR END |
IRS REAR END |
Click Here 1987-1996 IRS rear end
|
|
8.8 Straight Rear end Chrome Cover
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END CHROME COVER |
8.8 straight Rear End |
Click Here For CHROME 8.8 REAR END COVER
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END SUPPORT COVER |
8.8 straight Rear End |
Click Here For ALUMINUM 8.8 REAR END COVER
|
|
8.8 STRAIGHT REAR END FOR 28 TOOTH AXLES
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END for 28 tooth axles |
8.8 straight Rear End |
Click Here 1979-1996 8.8 Straight rear end
|
|
8.8 STRAIGHT REAR END FOR PIN DRIVE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END for pin drive |
8.8 straight Rear End |
|
Click Here For 8.8 straight rear end for pin drive
|
|
8.8 STRAIGHT REAR END VENT FITTING
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END VENT FITTING |
VENT FITTING for 8.8 straight Rear End |
Click Here For 8.8 STRAIGHT AXLE REAR END (VENT FITTING)
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Gear Oil |
Synthetic Oil |
Click Here For Gear Oil
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR S/S BRAKE LINES |
S/S BRAKE LINES |
Click Here For S/S BRAKE LINES
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR POP Rivet Kit |
S/S pop Rivets |
Click Here For S/S Pop Rivets and gun
|
|
S/S BRAKE LINES WITH AN3 ENDS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR AN3 TYPE ENDS ON S/S BRAKE LINES |
NEW NEW NEW |
Click Here For S/S BRAKE LINES WITH AN3 ENDS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR OEM RUBBER HOSES |
OEM AIMCO RUBBER HOSES |
Click Here For OEM RUBBER HOSES
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Pedal Box |
Pedal Box |
Click Here For Pedal Box
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SPEED BLEEDERS |
|
SPEED BLEEDERS
Click Here For SPEED BLEEDERS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR THREAD SETTER |
|
THREAD SETTER KIT
Click Here For Thread Setter Kit
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL SPACERS |
|
WHEEL SPACERS
Click Here For WHEEL SPACERS
|
|
WHEEL STUDS AND INSTALLER TOOL
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL STUDS |
|
WHEEL STUDS
Click Here For WHEEL STUDS
|
|
1987-1993 MUSTANG 5.0 FRONT SPINDLES FOR FORD MUSTANG
|
Back to Top |
| Item Description |
|
Price |
|
|
|
Price$449.95 note'spindles come with bearings,seals,nuts,washers and cotter pins
|
|
|
|
Ford 1987-1993 FRONT SPINDLES FOR FRACTORY FIVE OR EARLY MUSTANG (FRONT WHEELS) |
|
$449.95
|
|
Spindle nut kit 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
NEW FROM FORD |
Price$49.95
|
|
|
|
1987-1993 SPINDLE NUT KIT WITH HEAT TREATED WASHERS (Front Wheels) |
note: OEM FORD PARTS |
|
|
Spindle nuts kit Front wheels 1994-2004
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$39.95
|
|
|
|
1994-2004 SPINDLE NUTS note: socket size is 36MM (Front Wheels) |
note: OEM FORD PARTS |
|
|
Spindle nut kit rear IRS t-bird 1989-1997
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$24.95
|
|
|
|
1989-1997 SPINDLE NUTS note: socket size is 36MM (Rear Wheels if IRS Rear end) rear IRS t-bird 1989-1997 |
note: OEM FORD PARTS |
|
|
REAR BEARING KIT 1987-2004 with 8.8 live axle
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-2004 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-2004 REAR BEARING KIT with 8.8 live axle (REAR Wheels) |
note: WITH SEALS |
|
|
REAR BEARING KIT 1987-2004 FOR 8.8 CENTER SECTION
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-2004 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-2004 REAR BEARING KIT FOR 8.8 CENTER SECTION (REAR Wheels) |
note: WITH SEALS |
|
|
REAR WHEEL BEARINGS 1987-1997 FOR 8.8 IRS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-1997 8.8 REAR END |
Price$120.95
|
|
|
|
1987-1997 REAR WHEEL BEARINGS FOR 8.8 rear end (REAR Wheels) |
|
|
|
COBRA CAPS FOR THE SN95 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW TWO CAPS |
Price$22.95
|
|
|
|
1994-2004 NEW FROM FORD CAPS FOR THE 1994-2004 SPINDLE (Front Wheels) |
note: if you have banged up caps and would like them to look good then we have new ones from Ford |
|
|
MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW TWO CAPS |
Price$19.95
|
|
|
|
MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES (Front Wheels) |
note: if you have banged up caps and would like them to look good then we have new ones from Ford |
|
|
COBRA CAPS AND BEARINGS FOR THE SN95 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW BEARS AND NEW CAPS FROM FORD |
Price$199.95
|
|
|
|
1994-2004 sn95 NEW FROM FORD TWO BEARING assemblies AND WITH NEW CAPS FOR THE 1994-2004 SPINDLE (Front Wheels) |
note: if you have sn95 spindles and need new bearings then this is for you |
|
|
HUBS FOR IRS REAR END WITH 4 1/2 INCH BOLT CIRCLE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
HUB AND STUDS bolt with 4-1/2 circle |
Price$480.95
|
|
|
|
1994-2004 TWO HUB assemblies AND WITH NEW STUDS FOR T-BIRD REARS (REAR Wheels) |
note: 4 1/2 INCH BOLT CIRCLE |
|
|
| Item Description |
|
Price |
|
|
|
A LEFT AND RIGHT KNUCKLE |
Price$995.95
|
|
|
|
1989-1992 NEW FROM FORD TBIRD KNUCKLE assemblies AND WITH NEW BEARINGS (REAR Wheels) |
note: OEM TBIRD Knuckles 1989-1992 |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
Price$3.95
|
|
|
4 Brake line clips |
brake hose clips |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
Fluid for the assembly of master cylinders and brake calipers
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; Never use grease or oils on brake seals or master cylinder cups, as it will cause the seals & cups to swell |
|
Price For one 4-oz Bottle $6.95
|
|
|
This is the same Assembly Fluid that is used by all new car & truck Manufactures |
This fluid has many uses like lubing anything rubber or plastic, pulling wire thru conduit pipe or for marine pump impallers,valve seals,water faucet seals,fuel injector pump seals and anything you are having trouble assembling |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
BOOT AND SEAL KIT REAR WHEELS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1994-2004 REAR CALIPERS BOOT AND SEAL KIT (MUSTANG 2-seals and 2 boots) |
OEM BOOT AND SEALS REAR WHEELS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS
|
BRAKE FITTINGS FOR 3/16 TUBING, THREAD SIZE 3/8X24 |
Price$9.95
|
|
|
ADAPTER FITTING |
ADAPTER FITTING 1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; (3/16 (3/8 24 thread FEMALE) TO 7/16 INCH MALE inverted flare
|
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE |
Price$4.95
|
|
|
|
ADAPTER FITTING |
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare
|
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE |
Price$4.95
|
|
|
|
ADAPTER FITTING (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare |
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 X 3/16 TUBE NUT
|
BRAKE FITTING 3/16 X 3/16 |
Price$1.95
|
|
|
|
TUBING NUT FITTING |
FITTING 3/16 X 3/16 TUBE NUT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 X 7/16 TUBE NUT
|
BRAKE FITTING 3/16 X 7/16 |
Price$2.95
|
|
|
|
TUBING NUT FITTING |
FITTING 3/16 X 7/16 TUBE NUT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 for Aluminum Master Cylinder |
|
Price$10.95 for two fittings
|
|
|
FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 to convert Bubble Female in master Cylinder to bubble flare for steel lines for Aluminum Master Cylinder |
if you have a Cobra Aluminum Master Cylinder then you need these fittings to put your steel lines in the master Cylinder |
click on picture for more info
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder |
BRAKE FITTING 3/16 X 7/16 |
Price$5.95
|
|
|
|
FITTING 3/16 X 12MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder |
FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder |
BRAKE FITTING 3/16 X 7/16 |
Price$5.95
|
|
|
|
FITTING 3/16 X 10MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder |
FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 FEMALE IS 3/16 THREAD AND 3/16 THREAD
|
BRAKE FITTING 7/16 FEMALE TO 3/16 MALE |
Price$5.95
|
|
|
|
ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE |
ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE |
|
|
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY |
BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER |
10 MM X 1.0 BLEEDER SIZE THREAD
|
|
|
|
FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS Note: fits all Rear calipers tbird or mustang (Set OF TWO SB1010) (BLEEDER KIT) |
|
$12.95
|
|
BANJO BOLT KIT COBRA 2004-2004 FOR FRONT CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO FRONT 10 MM X 1.5 BOLTS AND 4 WASHERS
|
|
|
FORD BANJO BOLT KIT COBRA 2004-2004 FOR FRONT CALIPERS AND 4 HEAT TREATED WASHERS (Set OF TWO) (BOLT KIT) FRONT WHEELS |
Torque spec 25 inch LB
|
$14.95
|
|
BANJO BOLT KIT 1994-02 COBRA AND 1999-04 GT FRONT AND REAR
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO FRONT 10 MM X 1 BOLTS AND TWO REAR 10 MM X 1.5 BOLTS AND 8 WASHERS
$12.95
|
|
|
FORD COBRA 1994-02 AND GT 1999-04 BANJO BOLT KIT TWO FRONT BOLTS AND TWO REAR BOLTS AND 8 HEAT TREATED WASHERS (Set OF FOUR) (BOLT KIT) FRONT AND REAR WHEELS |
Torque spec 25 inch LB
|
$24.95
|
|
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 FRONT WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD COBRA BOLTS AND WASHERS |
BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE SPINDLE
|
|
|
FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE SPINDLE FOR FRONT WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) FRONT WHEELS |
|
$19.95
|
|
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 REAR WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD COBRA BOLTS AND WASHERS REAR WHEELS |
BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE AXLE BRACKET
|
|
|
|
FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE AXLE BRACKET REAR WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) REAR WHEELS |
|
$19.95
|
|
STAINLESS STEEL BUSHINGS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 S/S BUSHINGS |
FACTORY FIVE OR MUSTANG THIS WILL IMPROVE YOUR BRAKEING |
BETTER BRAKEING WITH S/S BUSHINGS
|
|
|
FORD MUSTANG 1987-1993 four s/s bushings (Front wheel calipers two per caliper) |
|
$39.95
|
|
RUBBER BUSHINGS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 RUBBER BUSHINGS |
MUSTANG 1987-1993 FRONT WHEEL OEM RUBBER BUSHINGS |
IF YOU JUST NEED OEM RUBBER BUSHINGS
|
|
|
FORD MUSTANG 1987-1993 Four Rubber bushings (Front wheel calipers two per caliper) |
|
$12.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
CALIPER BOLTS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 CALIPER BOLTS |
BOLTS ARE PLATED AND HAVE ANTI LOCK ON THREADS |
NEW OEM BOLTS
|
|
|
FORD MUSTANG 1987-1993 Four OEM Bolts (Front wheel calipers two per caliper) |
|
$39.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA MUSTANG TWO PISTON PBR CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 2 CALIPER PINS |
FOUR AINTI RATTLE CLIPS |
NEW OEM PINS
|
|
|
FORD PBR TWO PISTON CALIPERS 1994-2004 TWO OEM PINS FOUR ANTI RATTLE CLIPS TWO WASHERS AND TWO C-CLIPS (Front wheel calipers) |
|
$39.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: REAR WHEEL HARDWARE |
FOUR PAD CLIPS AND ANTI RATTLE BRACKET ALL STAINLESS STEEL |
COBRA AND GT
|
|
|
FOR 1994-2004 COBRA OR GT FOUR PAD CLIPS AND TWO ANTI RATTLE BRACKETS ALL STAINLESS STEEL (Rear wheel calipers) |
|
$19.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: REAR WHEEL HARDWARE |
FOUR PINS WITH BOLTS AND FOUR BOOTS |
COBRA AND GT
|
|
|
FOR 1994-2004 COBRA OR GT FOUR PINS AND BOOTS (Rear wheel calipers) |
|
$29.95
|
|
Spindle nut kit 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$14.95
|
|
|
|
1987-1993 SPINDLE NUT KIT WITH HEAT TREATED WASHERS (Front Wheels) |
note: OEM FORD PARTS |
|
|
FRONT WHEEL BEARINGS AND SEALS (FRONT WHEELS) 1987-1993 MUSTANG
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BEARINGS ONLY: RACES NOT INCLUDED BECAUSE THEY COME INSTALLED WITH THE ROTORS |
|
|
|
|
|
BEARINGS FOR FORD MUSTANG FRONT SPINDLES 1987-1993 TWO INNER AND TWO OUTER WHEEL BEARINGS AND TWO GREASE SEALS |
|
$59.95
|
|
REAR BEARING KIT 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-1993 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-1993 REAR BEARING KIT (REAR Wheels) |
note: WITH SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
THIS KIT IS 1/4 INCH PIPE. SIZE HOLE TO DRILL 29/64 .453 THEN TAP WITH 1/4 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
|
THIS KIT IS 1/8 INCH PIPE. SIZE HOLE TO DRILL 5/16 .312 THEN TAP WITH 1/8 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
1994-2004 COBRA OR MUSTANG & GT CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS |
TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS |
8 COPPER WASHERS
|
|
|
FOR 1994-2004 COBRA OR MUSTANG & GT TWO 10MM X 1.0 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers) |
|
$12.95
|
|
1987-1993 CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS |
TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS |
8 COPPER WASHERS
|
|
|
|
FOR 1987-1993 MUSTANG TWO 3/8 X 24 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers) |
|
$12.95
|
|
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY |
BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER |
10 MM X 1.0 BLEEDER SIZE THREAD
|
|
|
|
FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS (Set OF TWO SB1010) (BLEEDER KIT) |
|
$12.95
|
|
ADJUSTABLE ROD FOR master CYLINDER
|
Back to Top |
| Item Description |
|
Price |
Order |
|
ADJUSTABLE ROD FOR master CYLINDER |
|
|
|
|
|
ADJUSTABLE ROD FOR master CYLINDER |
|
$49.95
|
|
ADJUSTABLE PROPORTIONING VALVE
|
Back to Top |
| Item Description |
|
Price |
Order |
|
ADJUSTABLE PROPORTIONING VALVE |
MOUNTING HOLE DIAMETER .250 HOLE SPACING 1.00 INCH |
ADJUSTABLE PROPORTIONING VALVE
|
$59.95
|
|
|
MAX PRESSURE REDUCTION 57% INLET/OUTLET PORTS 1/8-27 NPT |
|
$59.95
|
|
FRONT WHEEL SPACERS 1994-2004 MUSTANG WITH 17 INCH WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: YOU MUST USE 17 INCH WHEELS FOR THESE SPACERS 7/32 INCH SPACERS FOR FORD MUSTANG FRONT SPINDLES 1994-2004 TWO WHEEL SPACERS 7/32 INCH AND TEN WHEEL STUDS 2 1/4 INCH LONG |
|
|
|
|
|
|
|
$59.95
|
|
IRS REAR END and KNUCKLE MOUNTING HARDWARE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
10 MOUNTING BOLTS AND LOCKING NUTS |
Price$49.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 10 MOUNTING BOLTS for mounting the knuckles and housing
| note: nuts are self locking |
|
|
IRS REAR END HOUSING MOUNTING HARDWARE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
4 MOUNTING BOLTS AND LOCKING NUTS |
Price$24.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 4 MOUNTING BOLTS for mounting the HOUSING
| note: nuts are self locking |
|
|
IRS REAR END MOUNTING BUSHINGS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
note: bushings go in the 8.8 housing next to the drive shaft flange |
Price$59.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END MOUNTING BUSHING
| 4 BUSHINGS |
|
|
IRS REAR END MOUNTING NUTS OR FRONT SN95 SPINDLE NUTS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
note: nuts go on the axle ends by the knuckles or on the front sn95 spindles |
Price$24.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 2 MOUNTING NUTS FOR AXLE ENDS OR FOR FRONT SN95 SPINDLES
| 2 NUTS |
|
|
New for pin drive 8.8 straight rear end shorten to 54 1/4 flange to flange with 31 tooth axles and all gear truetrac posi
|
Back to Top |
| Item Description |
|
Price |
|
|
1979-1998 8.8 straight axle for pin drive and ford 9 inch bearing ends and moser 31 tooth axles
|
Shortend for pin drive |
Price$1995.95
|
|
|
|
Ford Mustang 1979-1998 8.8 straight axle with 31 tooth axles and truetrac all gear posi rear powder coated gloss black
8.8 straight axle shortend for pin drive
| powder coated gloss black |
|
|
8.8 straight axle VENT FITTING
|
Back to Top |
| Item Description |
|
Price |
|
|
1979-1998 8.8 straight axle VENT FITTING
|
New from Ford Vent Fitting |
Price$19.95
|
|
|
|
Ford Mustang 1979-1998 8.8 straight axle Vent Fitting
| New Vent |
|
|
8.8 straight axle REAR END SUPPORT COVER
|
Back to Top |
| Item Description |
|
Price |
|
|
If you are going to do any Hi perfromance racing then you will need a support cover
|
Ford Motor Sport Product |
Price$217.95
|
|
|
|
Ford Mustang 1979-2004 8.8 straight axle Cover with bolts and gasket)
| note: support bolts for posi bearings |
|
|
COVER FOR 8.8 straight axle REAR END
|
Back to Top |
| Item Description |
|
Price |
|
|
High gloss Chrome and grade 8 bolts
|
|
Price$45.95
|
|
|
|
Ford Mustang 1986-2004 8.8 straight axle (Chrome Cover with bolts)
| Makes your Rear look good |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; most ff cobra builders use the wrong drill bits when doing the sheet metal work these bits are made for sheet metal work
|
Professional drill bits |
5 bits Price$9.95
|
|
|
|
Sheel metal twist drill bits 1/8 inch x 2 inch short extremely sturdy drills are effective for sideways stress rather than point wear |
DRILL KIT |
|
|
Cable Fork Kit for mark 111 Cobra
|
Back to Top |
| Item Description |
|
Price |
|
|
Cable Fork Kit for mark 111 Cobra
|
|
Price$69.95
|
|
|
|
|
Cable and Fork |
|
|
|
|
Back to Top |
| Item Description |
Price |
|
Order |
|
86-93 Mustang Clutch Fork Extension For Mcleod & Lakewood Bell housings IF you have a steel bell housing for racing then you will need an extension
|
$29.99 for racing |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for Tremec TKO
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for Tremec TKO
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR MkIII Coupe Custom Aluminum Driveshaft for Tremec TKO
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Coupe Custom Aluminum Driveshaft for Tremec TKO
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR Coupe Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR Coupe Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
OEM Ford Mustang brake light switch
|
BRAKE LIGHT SWITCH |
Price$14.95
|
|
|
|
BRAKE LIGHT SWITCH |
TWO WIRE SWITCH |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
Ford Motor Sport clutch adjustment and Quadrant
|
Double Hook Quadrant |
Price$119.95
|
|
|
|
This is for the mustang pedal box |
|
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
Spacer for the Fox xales
|
axle spacers |
Price$25.95
|
|
|
|
This is for the Fox axles if you are using the 1994-2004 mustang GT rotor or the cobra rotor |
|
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
JUST DRILL A HOLE AND PUT IN A THREAD SETTER
|
|
|
|
|
pro thread setter kit includes assortment of SAE poly nuts nosepieces and mandrels |
QUICK AND SIMPLE WAY TO PUT THREADS IN METAL OR PLASTIC |
|
|
|
|
|
|
$129.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
BUMP STEERING KIT |
Bump-steer is a change in toe angle caused by the suspension moving up or down. Bump-steer is built into the geometry of the suspension and steering system, and has nothing to do with turning the steering wheel |
|
|
|
The effect of bump-steer is for the wheel to toe-in or toe-out when the suspension moves up or down. This toe change or “steering” occurs any time the suspension moves, whether it is from body roll, brake-dive, or hitting a bump in the road. Bump steer is undesirable because the suspension is steering the car instead of the driver. |
|
$139.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
|
Pedal box For FF Cobra |
|
|
|
|
Pedal box For FF Cobra |
|
$225.96
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
|
GAS PEDAL |
|
|
|
|
GAS PEDAL FOR MARK 111 |
|
$119.96
|
|
Royal Purple 75W140 Synthetic
|
Back to Top |
| Item Description |
Price |
|
Order |
|
Royal Purple 75W140 Synthetic For differentials and manual transmissions max-gear outperforms other GL-5 gear oils because it combines the highest quality synthetic oils and that makes gears run smoother,quieter,cooler and longer.
|
Per Quart $19.99 |
|
|
| |
| | |
Note: Page takes a loooong time to load, lots of pictures
